OSRAM PrevaLED Core Z2 - Manual (Page 4)

4
INTRODUCTION
At present, PrevaLED ® Core Z2 light engines are available
as systems in different performance grades:
• Lumen packages of 800–5000 lm are available with a
good to very good color rendering (with typ. CRI 83
and typ. CRI 93).
• The lumen packages of 800–5000 lm with CRI 83 are
especially well suited for consumer applications.
The high efficacy of the light engines not only results in
minimized energy consumption of the luminaire, but also
reduces the thermal load on the luminaire, allowing for
smaller and lighter designs of the heat sink.
Both the CRI 90 and the CRI 80 types are available with
2700 K, 3000 K, 3500 K and 4500 K CCT; in lumen
packages of 800, 1500, 2000, 3000, 4000 and 5000 lm.
PrevaLED ® Core LED modules must be operated with
OPTOTRONIC ® power supplies of the “OTp” type. Available
types are detailed in the next section. All possible system
configurations are listed on the latest datasheet.
Additional details on optical, thermal, mechanical and
electrical characteristics can be found in the following
sections. Additional and updated information (as well as
updates of this guide) will be posted at
www.osram.com/
prevaled-core .
OSRAM also provides an extensive range of energy-saving
light management components, such as sensors and room
controllers. By use of these products, additional energy sa -
vings can be realized. For an overview of these products,
please visit
www.osram.com/lms .
The PrevaLED ® light engine consists of an LED module,
dedicated OTp and connection cable.
Movable 3D PrevaLED ® Core Z2
(works with Adobe Acrobat 7 or higher)