Ocean Optics Jaz Install - Manual (Page 19)

2: Installing Jaz
013-RD000-000-02-201103 11
2. When first connecting Jaz to your computer, you must run the Hardware Wizard for your PC to
recognize the new hardware. For Mac users, this step is not necessary.
3. In SpectraSuite, select Spectrometer | Rescan Devices. Your Jaz unit should be recognized in
SpectraSuite’s Data Sources pane as indicated by this icon:
Ethernet Connection
You can connect Jaz to the network via the Ethernet port on the JAZ-E module. A ferrite is provided with
your JAZ-E Ethernet module to be used in the event that you experience interference with any electronic
devices.
► Procedure
Follow the steps below to connect the port on the Jaz Ethernet & Memory module to a Power Over
Ethernet (POE) bridge or a switch to the network (e.g., an 8-port network hub):
1. Find the Ethernet cable and the ferrite that you received in your Jaz package.
2. Open the ferrite.