Connecting jaz to a computer via usb, Installing spectrasuite software, Installing the jaz unit – Ocean Optics Jaz Install User Manual
Page 18
2: Installing Jaz
10
013-RD000-000-02-201103
Installing SpectraSuite Software
You can install SpectraSuite either from the CD you received or from the Ocean Optics website
(
http://www.oceanoptics.com/technical/softwaredownloads.asp
).
If you already have SpectraSuite Core version 2.0.97 and OmniDriver Wrapper 2.0.52 or greater, just
perform a software update so that SpectraSuite recognizes your Jaz unit (see
►
Procedure
1. Close all other applications running on the computer.
2. Double-click on the SpectraSuite.exe file located in SpectraSuite | bin folder (or
SpectraSuiteMac.sh for Mac users) to run the software executable. For a destination, navigate to
the C:\Program Files\OceanOptics folder.
3. Connect your Jaz unit to your computer (see
).
4. Power-on your Jaz unit by pressing the Power button
.
5. For Windows PC users: The PC will launch the New Hardware Wizard. Follow instructions in the
Wizard so that your PC will properly recognize the Jaz unit.
6. Reboot your computer when requested.
7. To install on a Windows PC: Navigate to Install Ocean Optics Software | SpectraSuite |
Windows OS. The installation process begins.
8. To install on a Mac: Double-click on the CD icon and open the OceanOptics.html file to launch
the CD. Then, navigate to Install Ocean Optics Software | SpectraSuite | Mac OS. Double-click
on the newly selected .dmg file, and copy the SpectraSuite icon to Desktop or Applications.
9. To install on a Linux Platform:
full instructions.
10. Follow the prompts on the Installation Wizard.
11. Click OK to restart your computer. You have now installed the SpectraSuite software.
Note the Jaz units that you have installed are listed in the Data Sources pane.
Installing the Jaz Unit
This section contains instructions for connecting Jaz directly to a computer through the USB port or to the
network through the Ethernet port.
Connecting Jaz to a Computer via USB
►
Procedure
1. Connect the USB (B) cable that you received with your Jaz unit from the JAZ-DPU module to
your computer.