Ocean Optics SpecLine Offline Spectroscopy User Manual
Page 24
A: Reference
18
000-20000-090-02-1209
Menu
Command
Icon
Description
Identification | Display
Line Positions From
Database
N/A
Launches the database search and display of
database lines according to the given parameters.
This menu command is the same as clicking the
Start button in the Line Identification dialog box
with the Display line positions from Database
option selected.
Identification | Add
Line
Adds a peak to the list for the identification
process. After invoking this command, the cursor
in the Diagram window changes to a cross. Move
the cursor to the desired position and confirm by
clicking on it. The exact position of the cursor in
the diagram is displayed in the lower right button
in the status bar.
This command is also available in the Context
menu by clicking the right mouse button in the
Diagram window.
Identification | Delete
Line
Deletes the selected peak from the list for the
identification process. Select a peak by clicking on
the peak’s mark.
This command is also available in the Context
menu by clicking the right mouse button in the
Diagram window.
Line Search | Delete
All Lines
N/A
Deletes all peaks from the list for the identification
process.
This command is also available in the Context
menu by clicking the right mouse button in the
Diagram window.
Identification |
Wavelength of Peak
N/A
Adjusts the wavelength of the selected peak. This
allows you to easily adjust the spectrum, if you
know the exact wavelength value of the peak.
This command is also available in the Context
menu by clicking the right mouse button in the
Diagram window.
Identification
(Cont’d)
Identification | Line
Info
Displays all the available information about the
selected peak, including the wavelength and
signal values, and a list of all lines and band
structures found in the identification process with
details for each line. Select a peak by clicking on
the peak’s mark.
This command is also available in the Context
menu by clicking the right mouse button in the
Diagram window.