Ocean Optics HR2000CG-UV-NIR - Manual (Page 7)

HR2000 Introduction
HR2000 High-Resolution Fiber Optic Spectrometer 3
Interface Options
The HR2000 has both USB and serial port connectors (with the use of an adapter), enabling you to connect the
spectrometer to a desktop or notebook PC via a USB port or to a desktop, notebook, or to a handheld PC via a
serial port.
Computer
Interface Operating System
Requirements
Part Needed Description of Part
Desktop or
Notebook PC
via USB Port
Windows 98/Me/
2000/XP USB-CBL-1
(included) Cable that connects from USB port on HR2000 to USB port on
desktop or notebook PC
Desktop or
Notebook PC
via Serial Port Any 32-bit
Windows operating
system
USB-ADP-PC
(not included)
Adapter block that enables connection from serial port on
HR2000 to serial port on desktop or notebook PC; comes with 5
VDC power supply (required when connecting to serial port)
Handheld PC
via Serial Port Windows CE 2.11
or higher USB-ADP-H
(not included)
Adapter block that enables connection (with standard 9-pin
serial cable) from serial port on HR2000 to serial port on
handheld PC; comes with 5 VDC power supply (required when
connecting to serial port)
Shipment Components
The following information and documentation ships with the HR2000 Spectrometer:
Packing List
The packing list is inside a plastic bag attached to the outside of the shipment box (the invoice arrives separately).
The packing slip lists all items in the order, including customized components in the spectrometer (such as the
grating, detector collection lens, and slit). The packing list also includes the shipping and billing addresses, as well
as any items on back order.
Wavelength Calibration Data Sheet
Each spectrometer is shipped with a Wavelength Calibration Data Sheet that contains information unique to your
spectrometer. OOIBase32 Operating Software reads this calibration data from your spectrometer when it
interfaces to a PC via the USB port. Any other interface requires that you manually enter the calibration data in
OOIBase32 (select Spectrometer | Configure | Wavelength Calibration tab). See the OOIBase32
documentation for more information (refer to
Other Documentation for instructions on accessing OOIBase32
documentation).
Note: Please save the Wavelength Calibration Data Sheet for future reference.