beautypg.com

4) controller stand installation – Factory Direct Hardware Toto ABA990X#01FCP User Manual

Page 25

background image

25

(4) Controller stand installation

After connecting the splitter cord that comes with the unit to the signal relay cable (6-2 Finishing (3)), remove it from
the base through the conduit sheath and connect it to the controller stand itself.

Press the controller stand into the base.

Controller

stand

Connector

Fro

nt

Tighten the included Allen head set screw in the hole in the back of the controller stand. After turning the screw until it
stops, turn it 180 to 360° backward from where it stopped turning.

Please be careful not to let the screw protrude when doing so.

Allen head set screw

Front

Front

Always turn back the screw.
• Neglecting to do so could keep the remote controller stand from moving back and forth.

Always do this