Installation instructions (continued), Air box end cap testing, Performance testing – S&B Filters Cold Air Intake Kit - Cotton Filter 75-5050 User Manual
Page 4: Related items for your purchase
EMISSIONS STANDARD
The California Air Resource Board (CARB) requires that an E.O. identification label be applied to the vehicle in order to pass a smog
check inspection when a Performance Intake Kit has been installed. You must place the E.O. label provided on or near the intake kit
after installation so that a smog check technician can easily verify the E.O. number. As of April 2009, S&B has never had a product
where CARB denied an exemption request; however, the exemption process with CARB can take as long as 18 months. Check the
status of the exemption process by looking up a specific part number at
The CARB Exemption number and/or
status is listed under the Product Details section for each part number. If the status shows as “Pending,” CARB has yet to issue an
exemption. Products that have not been issued an EO number are street legal in most states, but may not be used on emission
controlled vehicles in the state of California and are for off road use only. If you purchased your kit from S&B Filters directly, we will
automatically mail you your Exemption Sticker when it is issued to us. If you purchased your kit from an authorized S&B Filters Dealer,
log onto our web site and register to receive your Exemption Sticker.
15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 -
INSTALLATION INSTRUCTIONS (Continued)
PERFORMANCE TESTING
• Engage parking brake and start your engine.
Listen for abnormal noises. If an air leak is
detected, re-inspect hoses and connections as
they may need to be repositioned and
tightened.
• S&B FILTERS recommends that you keep
your OE intake system in the event it is
required in the future.
• In order to maintain your warranty, all
connections and components must be
checked periodically for alignment and for
proper tension on all connections. Failure to
do so may void your warranty.
• Use only S&B FILTERS cleaning and oil
products to service your filter. Using any other
brand oil and or cleaners on your S&B air filter
may void your warranty.
SEE EXPLODED VIEW ON PAGE 5
4
P/N: 75-5050 / 75-5050D
RELATED ITEMS FOR YOUR
PURCHASE
• Ram Air Scoop (S&B P/N: 75-5067)
• Replacement Air Filter (Oiled)
(S&B P/N: KF-1035)
• Replacement Air Filter (Dry)
(S&B P/N: KF-1035D)
• Air Filter Wrap (S&B P/N: WF-1024)
Air Box End Cap Testing
Stock air boxes are a significant contributor to poor air flow which is why S&B designs custom air boxes with
secondary and/or enlarged openings. With that said, S&B recognizes the benefits of cooler air, so we have included a
plug to seal off the opening if so desired. For optimal performance, we recommend that the intake be used without
the end cap except in conditions of extreme heat.
ISO 5011 Test Data:
With the end cap installed, the intake improves airflow by an average of
37.2%
versus stock.
Without the end cap installed, the improvement increases to an average of
61.2%
.
Important Coolant Note
USE ONLY MOTORCRAFT PREMIUM GOLD COOLANT OR EQUIVALENT.
MIX 50 / 50 WITH DISTILLED WATER.
DO NOT ADD ORANGE COLORED COOLANT SUCH AS DEXCOOL BRAND.
SEE OWNERS MANUEL FOR ADDITIONAL INFORMATION
Precision II
Filter Cleaning & Oiling
Order online today at
through your local S&B distributor.
Part #: 88-0008