S&B Filters Cold Air Intake Kit - Cotton Filter 75-9014-1 - Manual

12/20/2006
(909) 947-0015 Telephone - (909) 947-0603 Fax
www.sbfilters.com
High Performance High Performance
Cold Air Intake Kit Cold Air Intake Kit
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
(Over)
75-9014-1
Toyota Tundra
V8 4.7L
QTY PARTS LIST QTY PARTS LIST
1 3.25” - 2” Adapter 2 #52 Hose Clamps
1 3/8” x 16” Hose 1 1/4” x 1/4” Hose Barb - NPT
1 3/16” x 18” Hose 1 3/8” x 1/4” Hose Barb - NPT
1 5/16” x 21” Hose 3 1/4” Washers
1 Intake Tube 1 Stick On Gasket
1 Intake Box 1 3/16” x 1.25” Hose Barb
1 Intake Lid 1 5/16” x 1/4” Hose Barb
1 CARB Sticker 3 M6 Hex Head Screws
1 Instruction Sheet 4 Sealing Washers
QTY
4
1
PARTS LIST
SS Pan Head Screws
Air Filter
TOOLS REQUIRED
10mm,12mm socket
Long ratchet extension
Flat & Phillips head
screwdriver
7. Disconnect all of the vacuum hoses from the
resonator box
9. Loosen and remove the mass air sensor from
the stock air box. Do not lose the small
screws they will be re-used
1. Turn off engine and disconnect negative battery
terminal.
2. Disconnect the mass air sensor electrical con-
nection
3. Release the electrical route clip on the
resonator box
5. Loosen the 3 bolts that screw the stock air
box to the fender
8. Remove the entire air intake system from the
vehicle
4. Remove the throttle body shield
1. Loosen the hose clamp on the stock
intake tube at the throttle