ZMODO ZP-IBH13-P 720P HD H.264 PoE IP Infrared Weatherproof Camera with QR Code Smartphone Setup - Manual of How to Access IP Camera - Manual (Page 84)

Chapter 3 Access to IP Camera on Zviewer PC
83
3.8.6 Alarm Settings
Figure 77
[Protection Time Setting] Set the time of motion detection. It can set detailed time periode of
everyday, up to four different time periods.
[Motion Detection Switch] Set whether to edit the mobile area or open the motion detection.
[Motion Detection Setting] After enable motion detection switch, the setting interface will appear grid
line. User only needs to right click the little cube on the image to set the motion detection area. Double
click the little cube to cancel related area detection.
[Alarm Action Mode] Set linkage output format after triggered alarm. Sound alarm or sending email
can be selected. Sending email is sending motion detection alarm information via email to user.
[Sensitivity] The sensitivity of motion detection includes four levels: highest, high, medium, and low.
[Output Delay] Set delay time of alarm linkage, time range is limited between 0～30s.
After setting all the parameters, click the [Submit] button.