ZMODO ZP-IBH13-P 720P HD H.264 PoE IP Infrared Weatherproof Camera with QR Code Smartphone Setup - Manual of How to Access IP Camera - Manual (Page 7)

Chapter 1 Product Introduction
6
Note
Installation Environment
 Do not install the camera in an area that is subject to violent vibrations.
 Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong light
can cause fatal damage to the camera.
 To avoid heat accumulation, good ventilation is required for a proper operating environment.
 Do not place the camera in extremely hot, cold temperatures, the operating temperature should be
between
−10 °C to 50 °C (14F to 122F), dusty or damp environment, and do not expose it to high
electromagnetic radiation.
1.4 Network IP Camera Connection
Note
Required Before Installation:
 Please make sure that router ’s UPNP and DHCP are enabled before camera.
 Router’s wireless authentication mode cannot be set “WEP Encrypted”.
 The camera must be connected to your router using a network cable before it is set up to
use Wi-Fi. Your mobile device must be connected to the same Wi-Fi network as the camera
(It is suggested to shut down mobile phone’s 3G Network).