B&B Electronics EIRM-EXTEND - Manual - Manual (Page 24)

Link-Fault-Pass-Through Settings
1. Link-Fault-Pass-Through: Check “Enable” or “Disable” to enable or disable link-
fault-pass-through for the Hardened Managed Ethernet Extender.
2. Reload: Select “Reload” button to reload previous settings.
3. Submit: Select “Submit” button to apply new settings.
18 Manual Documentation Number: EIRM-EXTEND-1412m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Log Settings
1. Event Log: Check or uncheck “Enable” to enable or disable Event Log Setting
for the Hardened Managed Ethernet Extender.
2. Log File Transfer: Select the “Log File Transfer” textbox and specify the IP
address of TFTP server.
3. Submit: Select “Submit” button to apply new settings.
4. Transfer: Select “Transfer” button to transfer log file to TFTP server.
System Management