B&B Electronics EIRM-EXTEND - Manual - Manual (Page 10)

4 Manual Documentation Number: EIRM-EXTEND-1412m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on status of the Hardened Managed
Ethernet Extender:
LEDs State Indication
Power 1
Power 2
Power 3 Steady Power on
Off Power off
Ethernet
Link/ACT
Steady A valid Ethernet connection established
Flashing
Transmitting or receiving Ethernet data
ACT stands for ACTIVITY
Off
Neither valid Ethernet connection established nor
transmitting/receiving Ethernet data
FDX
Steady
Ethernet Connection in full-duplex mode
FDX stands for FULL-DUPLEX
Off Ethernet Connection in half-duplex mode
Ethernet Extender
1
Green
The Ethernet Extender port transmitting/receiving at 1Mbps,
up to 1900M
Amber
The Ethernet Extender port transmitting/receiving at 3Mbps,
up to 1800M
2
Green
The Ethernet Extender port transmitting/receiving at 5Mbps,
up to 1600M
Amber
The Ethernet Extender port transmitting/receiving at 10Mbps,
up to 1400M
3
Green
The Ethernet Extender port transmitting/receiving at 15Mbps,
up to 1200M
Amber
The Ethernet Extender port transmitting/receiving at 20Mbps,
up to 1000M
4
Green
The Ethernet Extender port transmitting/receiving at 25Mbps,
up to 800M
Amber
The Ethernet Extender port transmitting/receiving at 30Mbps,
up to 700M
5
Green
The Ethernet Extender port transmitting/receiving at 40Mbps,
up to 600M
Amber
The Ethernet Extender port transmitting/receiving at 50Mbps,
up to 300M
Remote Steady The device operates in remote mode
Local Steady The device operates in local mode
Error Steady Error occurred
Link Steady A valid connection established