B&B Electronics EKI-6311GN-EU - Manual - Manual (Page 47)

Page 41
Figure 37 Reboot
5.6 System Log
System log is used for recording events occurred on the EKI-6311GN, including station connection,
disconnection, system reboot and etc.
Open “System Log” in “Tools” as below.
Figure 38 System Log
Remote Syslog Server
Enable Remote Syslog : Enable System log to alert remote server.
IP Address : Specify the IP address of the remote server.
Port : Specify the port number of the remote server.
5.7 Site Survey
Only available under Wireless Client mode, site survey allows you to scan all the APs within coverage.