B&B Electronics EKI-6311GN-EU - Manual - Manual (Page 26)

20
Figure 16 IP Settings (Router)
WAN Settings : Specify the Internet access method to Static IP, DHCP or PPPOE. Users must
enter WAN IP Address, Subnet Mask, Gateway settings provided by your ISPs.
LAN Settings : When DHCP Server is disabled, users can specify IP address and subnet mask
for EKI-6311GN manually. Make sure the specified IP address is unique on your network in order
to prevent IP conflict. When DHCP Server is enabled, users may specify DHCP IP Address
Range, DHCP Subnet Mask, DHCP Gateway and Lease Time (15-44640 minutes).
In AP mode, EKI-6311GN must establish connection with another wireless device
before it is set to Router mode. In Router mode, it is impossible for users to access
device via wired port, for WAN is on wired port and LAN is on wireless port. Users
can access device through the wireless device connected with EKI-6311GN.
In CPE mode, users can access EKI-6311GN via its wired port, for WAN is on
wireless port and LAN is on wired port when device is set to Router mode.
Bridge mode and AP Repeater mode are similar to AP mode when device is set to
Router mode; WAN is on wired port and LAN is on wireless port. Thus users must
also connect EKI-6311GN with another wireless device before it is set to Router
mode and access EKI-6311GN via the connected wireless device.
3.5 RADIUS Settings
RADIUS (Remote Authentication Dial-In User Service) is a server for remote user authentication and
accounting; playing a central role in the network in providing the capabilities of authenticating,
authorizing, accounting, auditing, alarming and etc. It allows an organization to maintain user profiles
in a central database that all remote servers can share.
Warning: