B&B Electronics EKI-6311GN-EU - Manual - Manual (Page 46)

40
5.4 Restore Factory Default Settings
The EKI-6311GN provides two ways to restore the factory default settings:
Restore factory default settings via Web
From “Configuration File”, clicking “Reset” will eliminate all current settings and reboot your
device, then default settings are applied.
Figure 19 Restore Settings
Restore factory default settings via RS-232
If software in EKI-6311GN is unexpectedly crashed and no longer reset the unit via Web, you may
do hardware reset via the reset button.
5.5 Reboot
You can reboot your EKI-6311GN from “Configuration File” in “Management” as below:
Click “Reboot” and hit “Yes” upon the appeared prompt to start reboot process. This takes a few
minutes.