Rainbow Electronics MAX9452 - Manual (Page 3)

MAX9450/MAX9451/MAX9452
High-Precision Clock Generators
with Integrated VCXO
_______________________________________________________________________________________ 3
DC ELECTRICAL CHARACTERISTICS (continued)
(V DDA = V DD = V DDQ = 2.4V to 3.6V, and V DDQ = 1.4V to 1.6V for MAX9451, T A = -40°C to +85°C. Typical values at V DDA = V DD =
V DDQ = 3.3V, and V DDQ = 1.5V for MAX9451, T A = +25°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
SERIAL INTERFACE INPUT, OUTPUT (SCL, SDA, CS)
Input High Level V IH
0.7
x V DD
V
Input Low Level V IL
0.3
x V DD
V
Input Leakage Current I IL ±1 µA
Output Low Level V OL 3mA sink current 0.4 V
Input Capacitance C I 10 pF
POWER CONSUMPTION
V DD and V DDA Supply Current I CC1 Output clock frequency = 155MHz 55 85 mA
V DDQ Supply Current I CC2
Output clock frequency = 155MHz
(MAX9450)
55 80 mA
AC ELECTRICAL CHARACTERISTICS
(V DDA = V DD = V DDQ = 2.4V to 3.6V, and V DDQ = 1.4V to 1.6V for MAX9451, T A = -40°C to +85°C. |V ID | = 200mV, V COM = |V ID / 2| to
2.4 - |V ID / 2|. Typical values at V DDA = V DD = V DDQ = 3.3V and V DDQ = 1.5V for MAX9451, T A = +25°C. C L = 10pF, clock output =
155.5MHz and clock input = 19.44MHz, unless otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
CLK OUTPUTS (CLK0, CLK1)
Reference Input Frequency f IN Measured at IN0 or IN1 0.008 500 MHz
Output Frequency f OUT Measured at CLK0 or CLK1 15 160 MHz
VCXO Pulling Range C L = 8pF (Note 2) ±50 ppm
Output-to-Output Skew t SKO Skew between CLK0 and CLK1 90 ps
Rise Time t R 20% to 80% of output swing 0.4 0.585 ns
Fall Time t F 80% to 20% of output swing 0.4 0.585 ns
Duty Cycle 44 56 %
Period Jitter (RMS) T J Measured at the band 12kHz to 20MHz 0.8 ps
1kHz offset -70 dBc/Hz
10kHz offset -110 dBc/Hz Phase Noise
100kHz offset -130 dBc/Hz