beautypg.com

Rainbow Electronics MAX19997A User Manual

General description, Applications, Features

background image

General Description

The MAX19997A dual downconversion mixer is a versa-
tile, highly integrated diversity downconverter that pro-
vides high linearity and low noise figure for a multitude of
1800MHz to 2900MHz base-station applications. The
MAX19997A fully supports both low- and high-side LO
injection architectures for the 2300MHz to 2900MHz
WiMAX™, LTE, WCS, and MMDS bands, providing
8.7dB gain, +24dBm input IP3, and 10.3dB NF in the
low-side configuration, and 8.7dB gain, +24dBm input
IP3, and 10.4dB NF in the high-side configuration. High-
side LO injection architectures can be further extended
down to 1800MHz with the addition of one tuning ele-
ment (a shunt inductor) on each RF port.

The device integrates baluns in the RF and LO ports,
an LO buffer, two double-balanced mixers, and a pair
of differential IF output amplifiers. The MAX19997A
requires a typical LO drive of 0dBm and a supply cur-
rent guaranteed below 420mA to achieve the targeted
linearity performance.

The MAX19997A is available in a compact 6mm x 6mm,
36-pin thin QFN lead-free package with an exposed
pad. Electrical performance is guaranteed over the
extended temperature range, from T

C

= -40°C to +85°C.

Applications

2.3GHz WCS Base Stations

2.5GHz WiMAX and LTE Base Stations

2.7GHz MMDS Base Stations

UMTS/WCDMA and cdma2000

®

3G Base

Stations

PCS1900 and EDGE Base Stations

PHS/PAS Base Stations

Fixed Broadband Wireless Access

Wireless Local Loop

Private Mobile Radios

Military Systems

Features

1800MHz to 2900MHz RF Frequency Range
1950MHz to 3400MHz LO Frequency Range
50MHz to 500MHz IF Frequency Range
Supports Both Low-Side and High-Side LO

Injection

8.7dB Conversion Gain
+24dBm Input IP3
10.3dB Noise Figure
+11.3dBm Input 1dB Compression Point
70dBc Typical 2 x 2 Spurious Rejection at

P

RF

= -10dBm

Dual Channels Ideal for Diversity Receiver

Applications

Integrated LO Buffer
Integrated LO and RF Baluns for Single-Ended

Inputs

Low -3dBm to +3dBm LO Drive
Pin Compatible with the MAX19999 3000MHz to

4000MHz Mixer

Pin Similar to the MAX9995/MAX9995A and

MAX19995/MAX19995A 1700MHz to 2200MHz
Mixers and the MAX9985/MAX9985A and
MAX19985/MAX19985A 700MHz to 1000MHz
Mixers

42dB Channel-to-Channel Isolation
Single +5.0V or +3.3V Supply
External Current-Setting Resistors Provide Option

for Operating Device in Reduced-Power/Reduced-
Performance Mode

MAX19997A

Dual, SiGe High-Linearity, 1800MHz to 2900MHz

Downconversion Mixer with LO Buffer

________________________________________________________________

Maxim Integrated Products

1

Ordering Information

19-4288; Rev 0; 10/08

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

PART

TEMP RANGE

PIN-PACKAGE

MAX19997AETX+

-40°C to +85°C

36 Thin QFN-EP*

MAX19997AETX+T

-40°C to +85°C

36 Thin QFN-EP*

+

Denotes a lead-free/RoHS-compliant package.

*EP = Exposed pad.
T = Tape and reel.

Pin Configuration/Functional Block Diagram appears at
end of data sheet.

WiMAX is a trademark of WiMAX Forum.

cdma2000 is a registered trademark of Telecommunications
Industry Association.