Grain Systems Tanks PNEG-4135A - Manual (Page 25)

3
Hardware Requirements
Topics Covered in this Chapter
▪ Bolt and Nut Pairings
▪ Hardware for 3–Post Sidewall Sheets on Bins that are 135 Ft in Diameter
▪ Bolt Torque Specifications
▪ Identifying Bolt Grades
▪ Color Chart for Bin Hardware Bucket Lids
▪ Bolt Identification
Bolt and Nut Pairings
This chart lists the correct nut to use with each size of bolt.
Nut Part Number Nut Size Type Hex or Flanged Bolt Size Bolt Part Number
S-396 5/16 YDP Hex
5/16 x 3/4 S-275
5/16 x 1 1/4 S-277
S-3611 5/16 YDP Flanged 5/16 x 1 S-10260
S-456 3/8 YDP Hex
3/8 x 1 S-7487
3/8 x 1 1/2 S-7488
3/8 x 2 S-10165
S-9426 3/8 JS Flanged
3/8 x 1 S-7485
3/8 x 1 1/2 S-7488
S-9281 7/16 JS Hex
7/16 x 1 1/2 S-10262
7/16 x 2 S-9389
7/16 x 3 1/4 S-10261
Hardware for 3–Post Sidewall Sheets on Bins that are 135 Ft in
Diameter
Reference the chart for hardware requirements for 3–post sidewall sheet connections on bins that are 135
ft in diameter .
Table 3-1 Hardware for 3-Post Sidewall Sheets on Bins that are 135 Ft in Diameter
Gauge Horizontal Seam Vertical Seam Stiffener to Sidewall Overlap Seam
13 3/8-1 (22) 3/8-1 (48) 3/8-1 (12) 3/8-1 (2)
12 3/8-1 (22) 3/8-1 (48) 3/8-1 (12) 3/8-1 (2)
11 3/8-1 (22) 3/8-1 (48) 3/8-1 (12) 3/8-1 (2)
10 3/8-1 (22) 3/8-1 (48) 3/8-1 (12) 3/8-1 (2)
9 3/8-1 (22) 3/8-1 (48) 3/8-1.5 (12) 3/8-1.5 (2)
8 3/8-1 (22) 3/8-1 (48) 3/8-1.5 (12) 3/8-1.5 (2)
6 3/8-1.5 (22) 3/8-1.5 (48) 3/8-1.5 (12) 3/8-1.5 (2)
5 3/8-1.5 (22) 3/8-1.5 (48) 3/8-1.5 (12) 3/8-1.5 (2)
Pneg-4135A 135 Ft Diameter 40-Series Bin 25