beautypg.com

Installing roof exhauster assembly, Chapter 8: accessories – Grain Systems Tanks PNEG-4135A User Manual

Page 157

background image

Chapter 8: Accessories

Figure 8-8 Roof exhauster assembly

A

5/16 x 1 in. hex bolt (S-10260)

D

5/16 in. flange nut, (S-3611)

B

Roof exhauster hood

E

Exhauster mounting plate (CTR-0348)

C

Tube Caulk

Installing Roof Exhauster Assembly

The roof exhauster assembly replaces one of the roof flashing panels and allows for the roof exhauster to
be installed.

Before You Begin

IMPORTANT: Determine the location of the roof exhauster and remove the existing roof flashing panel at

this location. Install the peak-to-exhauster ladder kit next to the roof exhauster on the next
available rib. The location of the roof exhauster can vary. It should be installed in a location
that is free of obstructions, where it does not interfere with any other accessories on the
roof.

Pneg-4135A 135 Ft Diameter 40-Series Bin

157