Rough Country 909 - Manual (Page 2)

1698C-4” KIT
Fr Coil Springs (A)
Rr Coil Spring (B)
1908BOX1:
1-Crossmember (C)
1908Box2:
2-Transmission Bracket (D)
1-Skid Plate (E)
4-Front Frame bracket flag nuts (F)
2-Fr Axle Brake Bracket (G)
2-Fr Bump Stop Brackets (H)
2-Front Sway Bar Links (I)
1-Rear L/A Axle Mount (J)
1-Dr Rear Frame Bracket (K)
1-Pass Rear Frame Bracket (L)
4-Rr Frame Bracket Flag Nuts (M)
2-Rear Sway Bar Brackets (N)
2-Rear Lower Shock Brackets (O)
1908Box3:
2-Rear Lower Long Arm (P)
2-Rear Lower Flex Joints
1-Flex Joint Tool
1908Box4:
1-Dr Front Lower Long Arm (Q)
1-Pass Front Lower Long Arm (R)
2-Front Lower Flex Joints
1-Dr Upper Adj Front Arm (S)
1-Pass Upper Adj Front Arm (T)
2-Fr Upper Flex Joints
1908Box5:
1-Rear Upper Y-Link (U)
1-Upper Y-Link Flex Joint
1084 Front Track Rod:
1-Track Rod Body (V)
1-Heim End
1084Poly Bag Containing:
Heim End Spacers (2)
Bushings (2)
Sleeve
12mm x 65mm Bolt
Flat Washer
12mm Lock nut
Jam Nut
1908Bag1:
Instruction Sheet Bag
1908Bag2:
For Front Cross-member:
4-10m x 80mm Bolts
4-10mm x 35mm Bolts
8-10mm Flat Washers
4-7/16” x 1 1/4” Bolts
4-7/16” Flat Washers
For Transmission Mount:
4-7/16” x 1 1/4” Bolts
For Skid Plate:
4-5/16” x 1 1/4” Bolts
4-5/16” Flat Washers
For the Front Lower Control Arm:
2-9/16” x 4 1/2” Bolts
2-9/16” Lock Nuts
4-9/16” Flat Washers
For Front Bump stop:
2-8mm x 95mm Bolts
2-8mm Flat Washers
For Front Axle Brake Line Brackets:
2-1/4” x 1” Bolt
2-1/4” Lock Nuts
4-1/4” Flat Washers
For Lower Shock Bolts:
4-5/16” x 1” Bolts
4-5/16” Lock Nuts
8-5/16” Flat Washers
1131Bag:
For Front Sway Bar Disconnects:
2-1/2” Lock nuts
2-Hitch Pins
2-1/2” Flat washers
2-Disconnect Mounting Pins
2-12mm Flange Lock Nuts
2-12mm Jam Nuts
2-Rod Ends
2-Crush Sleeves
2-Frame Brackets
1908Bag3:
For Rear Control Arm Mounts:
8-1/2” x 1 1/2” Bolts
8-1/2” Flat Washers
For Rear Arm Axle Mount:
3-14mm x 50mm Bolts
3-14mm Flat Washers
For Rear Lower Control Arm:
2-9/16” x 4 1/2” Bolts
2-9/16” Lock Nuts
4-9/16” Flat Washers
For Rear Upper Y-Link:
1-9/16” x 4 1/2” Bolt
1-9/16” Lock Nut
2-9/16” Flat Washers
For Rear Upper Brake Brackets:
4-1/4” x 3/4” Bolts
4-1/4” Lock Nuts
8-1/4” Flat Washers
For Rear Sway Bar Brackets:
4-10mm x 90mm Bolts
4-10mm Flat Washers
For Rear Bump stop:
2-3/8” x 3 1/4” Self Tap Bolts
1908Bag4: Containing
For Rear Lower Shock Mount:
2-12mm x 100mm Bolts
2-12mm Sleeves
2-12mm Flat Washers
Perf2.24WJ:
2-2.2 Series RCX Front Shock (W)
2-2.2 Series RCX Rear Shock (X)
KIT CONTENTS
This kit is packaged in 7 boxes. Please makes sure you have all the need parts and understand where they go prior to
beginning installation. Please use the attached picture to match parts to their descriptions shown below.