Rough Country 1109 - Manual

JEEP YJ FR SWAY BAR DISCONNECT KIT
Thank you for choosing Rough Country for your suspension needs.
Please read all the instructions before beginning the installation. Check the kit hardware against the parts list. Be sure
you have all the needed parts and understand where they go. If you have any questions about the installation of this kit,
call Rough Country at 731-285-9000.
NOTICE TO DEALER AND VECHICLE OWNER
Any vehicle equipped with any Rough country product must have the “Warning to Driver” decal installed on the sun visor
or dash. The decal is to act as a constant reminder for whoever is operating the vehicle of its unique handling character-
istics. INSTALLING DEALER—It is your responsibility to install the warning decal and to forward these installation in-
structions on too the vehicle owner for review and to be kept in the vehicle for its service life.
92110900
1/2” Socket / Wrench
3/4” Socket / Wrench
19mm Socket / Wrench
9/32” drill bit
Tools Needed:
Torque Specs:
Size Grade 5 Grade 8
3/8” 30 ft/lbs 35 ft/lbs
1/2” 65 ft/lbs 90 ft/lbs
9/16” 95 ft/lbs 130 ft/lbs
INSTALLATION INSTRUCTIONS
1. Remove the stock sway bar links from the sway bar and the spring plate using a 3/4” wrench. See Photo 1.
2. Remove the spring plate using a 3/4” socket. See Photo 2.
PHOTO 1 PHOTO 2