Toner Cable TVM9150PKG Multiformat 3G-HD-SD Video Waveform Monitor and Audio Signal Analyzer User Manual
Page 8

969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
ASI Input Module (TVM-VTM-ASI)
Two passive looping inputs accepting DVB-ASI or SMPTE 310M signals, auto-detect. Monitoring of ATSC PSIP or DVB
PSI tables. ETSI TR 101-290 priority 1, 2 and 3 alarms including buffer errors
Input Data Rate
DVB-ASI: 270 Mb/s, maximum payload 120 Mb/s
SMPTE 310M: 19.393 Mb/s, or 38.785 Mb/s
Input Connectors
4 BNCs, Hi-Z passive looping
Input Level
800 mV, nominal
Input EQ
250 m, Belden 8281
Return Loss
≤-15 dB, 5 to 270 MHz
Monitor Output
Follows the selected digital input
Output Level
800 mV, nominal
Output Data Rate
DVB-ASI: 270 Mb/s
SMPTE 310M: 19.393 Mb/s, or 38.785 Mb/s
Output Connector
BNC
ATSC Display Tables
PAT (Program Association Table)
INFO (from the Program and System Information Protocol (PSIP))
PMT (Program Map Table)
MGT (Master Guide Table)
VCT (Virtual Channel Table)
RRT (Region Rating Table)
STT (System Time Table)
EIT (Event Information Table)
EPG (Electronic Program Guide)
BW (Bandwidth)
DVB Display Tables
PAT (Program Association Table)
INFO (from the Program and Information Table (SI))
PMT (Program Map Table)
EIT (Event Information Table)
CAT (Conditional Access Table)
NIT (Network Information Table)
SDT (Service Description Table)
BW (Bandwidth)
Jitter Evaluation Input Module (TVM-VTM-JEM)
Two passive looping inputs accepting HD SMPTE 292M or SD SMPTE 259M-C formats
Data Rate
270 Mb/s, 1.485 Gb/s, auto-detect
Connectors
4 BNCs, Hi-Z active-looping
Level
800 mV, nominal
Input EQ
270 Mb/s: 250 m, Belden 8281
1.485 Gb/s: 80 m, Belden 8281
Return Loss
≤-15 dB 5 MHz to 1.485 GHz
SDI Monitoring Output
Follows the selected digital input
Output Data Rate
270 Mb/s and 1.485 Gb/s
7903.*0XOWLIRUPDW*+'6'9LGHR:DYHIRUP0RQLWRUDQG$XGLR6LJQDO$QDO\]HU