Toner Cable FSM-11R Fusion Splicer - Manual

FSM-11S | FSM-11R
Splicemate
TM
Fusion Splicers
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications Subject To Change Without Notice Rev 06-11 ©Toner Cable Equipment, Inc.
SpliceMate (FSM-11) is the world’s smallest and most portable
fusion splicer and is designed to meet the challenges posed by
today’s fiber networks. SpliceMate fits in the palm of your hand,
yet it’s smart and reliable enough to be used with confidence by
inexperienced operators.
SpliceMate’s advanced intelligence features include two-camera
fiber inspection to insure the splice is right and Auto Arc
Calibration...an industry first. It’s easy to operate and quickly
makes low loss splices with all common types of optical fibers
up to 4 fiber ribbons. SpliceMate is available with a variety of
powering options including a battery pack and adapters to work
with AC or DC power sources.
A workstation, specifically designed for the SpliceMate, is avail-
able for simplified splicing in the field. Whether splicing on a
pole, in a bucket, or in a neighborhood...SpliceMate is the friend
to have along on the job!
Specifications
Parameter Value
Model FSM-11S Fusion Splicer | FSM-11R Fusion Splicer
Applicable Fibers SMF, MMF, NZ-DSF, DSF
Number of Fiber FSM-11S single fiber FSM-11R Up to 4-fiber ribbon
Cladding Diameter 125μm
Coating Diameter 250μm and 900μm
Typical Average Splice Loss SMF = 0.05dB / MMF = 0.02dB
Splicing Time FSM-11S 15 seconds FSM-11R 20 seconds
Arc Calibration Method Automatic and manual methods
Splicing Modes (40) Auto SM / NZ / DS Auto MM SM, MM, NZ-DSF, DSF
Splice Loss Estimate Based on dual camera inspection
Monitor 3.5”, adjustable monitor angle (front or top selectable)
Tube Heating Time 40 seconds
Number of Splice / Heat with Battery 30
Power Supply AC, DC, Battery
Terminals USB
Wind Protection
30 mph
Dimensions 110W x 80D x 100H (mm) / 4.33W x 3.14D x 3.94H (inches)
Weight with Battery 0.80kg / 1.76 lbs.
Features
• Highly portable
• Auto arc calibration
• Dual camera inspection • 30 mph wind protector
• 3.5” dual direction monitor • Single or 4-fiber versions
• 40 second tube heater available SpliceMate shown with Portable Workstation