Toner Cable No. 10 Plyseal Tape User Manual
Bishop, No. 10 plyseal & no. 3 bi-seal tape
Telephone:
Nationwide:
Fax:
E-mail:
Internet:
11/04
Bishop No
.10 Pl
yseal & No
.3 Bi-Seal T
ape
215-675-2053
800-523-5947
215-675-7543
http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
No. 10 Plyseal & No. 3 Bi-Seal Tape
BISHOP
NO. 10 PLYSEAL
Permanently Seal and Protect
Sub-Surface or Overhead Low
Voltage Electrical
Connections
High dielectric strength.
Superior adhesion to metal, all types of rubber
and synthetic cable insulations and jackets.
Impervious to water, salt water, soil and corro-
sive chemicals.
Will not adversely affect cable insulations.
Protect connections when subjected to excessive
flexure.
Unexcelled for cold weather applications.
Description: Bishop No. 10 Electro-Seal compound
has the super adhesive qualities and dielectric
strength to permanently seal all low voltage electri-
cal connections - sub-surface or overhead. It is
impervious to ozone, water, salt water, soil chemi-
cals or other corrosive chemicals. It is unexcelled
for cold weather applications for it is workable from -
40° to 80°C, and, also maintains flexibility and a per-
fect seal even when subject to extreme flexure.
No. 10 Electro-Seal holds fast and permanently to
metal and all types of rubber and synthetic cable
insulation and jackets with no adverse effect on the
cable insulation itself.
Recommended Uses: For encapsulating and pro-
tecting all types of sub-surface connectors as well
as all types of overhead connectors, duct seals and
cable end seals.
Packaging: Each roll is boxed.
PROPERTY
VALUE
UNIT
METHOD
Physical
Thickness
0.125
Inches
ASTM D-1373
3.175
mm
Tack
Excellent Visual
*BTM-412
Fusion
Excellent Visual
*BTM-409
Operating Temp.
Maximum
80
°C
*BTM-608
Minimum
-40
°C
*BTM-607
Chemical
Water Absorption
0.06
%
ASTM 570
Ozone Resistance Excellent 0.03%
ASTM D1373
Corrosion
None
Visual
ASTM D69
Acid and Alkaline
Passed
Visual
*BTM-814
Electrical
Dielectric Constant 2.6
--
ASTM D150(Hz)
Power Factor
0.02
--
ASTM D150(HZ)
Dielectric Strength 245*
Volts/mil ASTM D1373
Volume Resistivity 10
15
Ohm/cm ASTM D257
*245 VPM on tape as manufactured
500 VPM when tested on .020” (508 mm) thick specimen
Data in the table represents average test results, and are not to be used
for specification purposes.
*BTM - denotes Bishop Test Method where no industry standard is
applicable.
No. 10 Plyseal UPC #02626
ROLL SIZE
ROLLS PER CASE
WEIGHT PER CASE
3 3/4 in x 10 ft
10
31 lbs
95.25 mm x 3.048 m
14 kgs