Toner Cable QMOD-SDI HD-SDI Modulator - Manual

969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Applications
HD-SDI
Digital Signage
HD/SD Cable Receivers
HD/SD Satellite Receivers
HD/SD Media Sources
QMOD HDTV Modulators
CR QMOD™ technology is opening the door to new HDTV
applications. Innovative in design and value, QMOD™ HDTV
Modulators enable cost-effective distribution of digital sig-
nage and HD subscriber sources using existing broadband
coax cabling in sports, retail and entertainment facilities, cor-
porate offices, colleges, schools and worship centers.
• Create your own on-site HDTV broadband distribution sys-
tem using a variety digital signage, HD, SD, and AV
sources
• Distribute digital signage, satellite, cable, and media as
HD digital cable channels over existing broadband wiring
• View HD sources at any destination using HDTV displays
or tuners
QMOD-SDI HD-SDI Modulator
• HD/SD-SDI auto-syncs video input with embedded audio
• HD Component, and S-Video/Composite video inputs
• Switchable between SDI, Component, and video
QMOD-HDSC HDTV Scaler Modulator
• In-stream scaler for RGBHV/Component inputs up to
1080p
• Formats and positions video for broadcast
• Converts PAL HD video to NTSC
• SD S-video and composite video
• Buffered RGBHV Out for monitoring RGB input
• Switchable between RGB/Component and composite
video
QMOD-HD HDTV Modulator
• HD RGBHV, Component, and S-Video/Composite video
inputs
• Switchable between RGBHV/Component and video
Shared Features
• Employs pro-grade HD encoding by NTT that minimizes
artifacts for motion video and signage “tickers”
• Merges audio with video from stereo, digital optical and
coax inputs
• Digital coax/optical and stereo audio inputs
• Switches via GPI inputs to present EAS AV broadcasts
• Creates an HD 720p/1080i or SD 480p/480i MPEG2
stream with MPEG1 stereo audio for broadcast
• Delivers a fully agile QAM 64/256 digital cable channel 2-
135
• Amplifies for distribution over an on-site broadband cable
system with adjustable output level to 29 dBmV
• Sets up with front-panel buttons and easy to use menus,
including inputs, encoding, channel, and RF options
• Fast processing - starts up in less than 4 seconds
• Integrates with RS-232 control and feedback with simple
ASCII commands
• Saves power and rack space using efficient design, fan-
free cooling, and compact enclosure
• Mounts in optional 1RU single (RK1) or dual (RK2,
RK2EZ) 19” rack kits