Toner Cable XPD-2P Power Dividers - Manual

;3'6HULHV
3RZHU'LYLGHUV
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications Subject To Change Without Notice Rev 06-13 © Toner Cable Equipment, Inc.
Specifications
Power Dividers 2-Way 4-way 8-Way
Model Number XPD-2P XPD-4P XPD-8P
INSERTION 5-40 MHz < 4.2 < 9 < 15
LOSS (In-Out) 40-470 MHZ < 4.5 < 8 < 14
(Max) dB 470-860 MHz < 4.5 < 8.5 < 14
950-1750 MHz < 6.0 < 10.5 < 15
1750-2300 MHz < 6.5 < 11 < 18
ISOLATION 5-40 MHz > 12-13 > 16-23 > 20
LOSS (Out-Out) 40-470 MHz > 20 > 20 > 20
(Min) dB 470-860 MHz > 20 > 20 > 20
950-1750 MHz > 20 > 20 > 20
1750-2300 MHz > 18 > 16 > 18
RETURN LOSS
In (min) dB
5-40 MHz > 13-16 > 12 > 9-10
40-2300 MHz > 16 > 10 > 10
RETURN LOSS
Out (min) dB
5-40 MHz > 9-18 > 12-18 > 6-10
40-2300 MHz > 14 > 8 > 8
Connectors 75 Ohm “F” Type
Power Dividers are used to provide input signals to several receivers from on
antenna/LNB combination
Frequency range 5 MHz - 2300 MHz
Connectors F Type
Impedance 75 Ohms
Power Passing
All Ports Diode Isolated 30 Vdc 1A