Veris Industries VH7200 SERIES Install User Manual
Veris Industries Equipment
Table of contents
Document Outline
- - None: No function will be associated with the input
- - Service: a backlit flashing Service alarm will be displayed on the humidistat LCD screen when the input is energized. It can be tied in to the AC unit control card, which provides an alarm in case of malfunction.
- - Canister: a backlit flashing Canister alarm will be displayed on the humidistat LCD screen when the input is energized. It can be tied to a Dry contact output supplied by others.
- This parameter (Personal Area Network Identification) is used to link specific humidistat to a single specific Viconics wireless gateway ( VWG ) For every humidistat reporting to a gateway ( maximum of 30 device per gateway ), be sure you set the SAME PAN ID value both at the gateway and the humidistat(s).
- Viconics recommends using only the 2 last channels ( 25-2575MHz and 26-2580MHz )
- BI 1
- Default value = None
- Canister, a back-lit flashing Canister alarm will be displayed on the humidistat LCD screen when the input is energized
- Service, a back-lit flashing Service alarm will be displayed on the humidistat LCD screen when the input is energized
- Hum cph
- Dhu cph