1 introduction – Soft dB Opus Suite SLM & 3Vib Module User Manual
Page 4

1
1 Introduction
Congratulations on your purchase of the Opus SLM & 3Vib module.
The Opus Software Suite is a Sound and Vibration software that contains several modules:
SLM 4-ch module : 4-channels, Class 1 (IEC 61672 and ANSI S1.43)
SLM & 3Vib module : 1 SLM channel (same as SLM 4-ch module) and 3 vibration channels
(ISO 8041 and ISO 2631)
Data Logger module
Building Acoustic module
Sound Transmission (ASTM E 336/ISO 140-4)
Reverberation Time (ISO 3382)
Speech Privacy (ASTM E 2638 and ASTM E 1130)
Building Vibration module (DIN 45669-1 and ANSI S2.46)
Intensity module (IEC 1043)
The Opus Suite is intended to run on a Concerto. The software can also be installed on a computer if
an Alto-6ch or an I-Track unit is connected. Moreover, some post-processing functions are available
on a PC even if no compatible unit is detected.
The current user’s manual presents the SLM & 3Vib Module.
General measurements Specifications
Sound Level Meter
Vibration
General
description
1-channel Class 1 Integrating SLM
Conform IEC 60561/60804/61672; ANSI
S1.42
3 vibration channels for tri-axial
human vibration analysis.
Conforms to ISO 2631-1
Input Range
Linearity range (at 50mV/Pa) :
25-119 dBA (low range)
37-130 dBA (high range)
± 15 g = ± 147 m/s² @ 100 mV/g:
Frequency
20 kHz bandwidth
Adjustable 200 Hz to 1 kHz bandwidth
Signal
weighting
Frequency weighting: A, C, Z
Time weighting: Slow, Fast, Impulse, Peak,
Leq, SEL
Instant, min or max value during the
averaging period
Frequency weighting: c, d, e, j,k or
none.
Instant or average value during the
averaging period.
Measurement
Type
Global level history, resolution starting at
10 ms
1/3 octave band spectrum (IEC 1260 Type
1), 6.3 Hz to 20 kHz frequency span
FFT spectrum, 1 kHz to 20 kHz bandwidth
with 854 lines
Global level history
FFT spectrum, 200 Hz to 1 kHz
bandwidth with adjustable resolution
from 0.05 to 1 Hz.