2 vibration input setup, 1 vib input selection, 2 vib input type – Soft dB Opus Suite SLM & 3Vib Module User Manual

Page 25: 3 vib input sensitivity and calibration, Vibration input setup, Vib input selection, Vib input type, Vib input sensitivity and calibration

6.2 Vibration Input Setup

6.2.1

Vib Input Selection

The SLM and Vib application uses its inputs 2, 3 and 4 (X, Y and Z axis) to perform vibration
measurements. Click on the input button (at the right of the window) to enable (light green) or
disable (dark green) the corresponding input.

If the Measurement Type is set to one of the ISO 2631 measurements, the three vibration channels
will be enabled or disabled as a whole.

6.2.2

Vib Input Type

The available input types are DC, AC and ICP sensors.

6.2.3

Vib Input Sensitivity and Calibration

The input sensitivity can be manually changed in the text field or it can be calibrated using the

calibration function and a sensor calibrator. Click the

button to launch the Calibration

interface.