Soft dB Mk3-HV1 Smart Piezo Drive Spec sheet - Manual

Smart Piezo Drive Model Mk3-HV1
Programmable & Self-instrumented 200 Volt Amplifi er
The Smart Piezo Drive is a 6-channel, very low-noise, low-drift, high-voltage amplifi er for Scanning-Probe Microscopy
applications. With three main inputs, three auxiliary inputs, a wide range of possible adjustments of the parameters
(output offsets, gains and bandwidths), the Smart Piezo Drive is a feature-rich, extremely versatile product.
INDUSTRY FIRSTS
• Embedded high-precision DSP board allows the amplifi er to be completely software-controlled through a USB or Ethernet link
• 3-channel real-time scope with unlimited recording function
• Low-pass fi ltering and adjustable slew-rate limit on offset changes to avoid crashes due to fast motions
• Emergency Return-to-Preset function immediately returns all outputs to a preset “safe” position, with a slew-rate limit
during the return
• Drift-Correction function to track thermal drifts of the scanned surface
• Completely software-controllable parameters on all channels:
ü Bandwidth (1kHz to 50kHz)
ü Gain (x1 to x20)
ü Offset (full range)
SOFTWARE CONTROL INTERFACE
This interface, based on a DSP board, uses a USB or an Ethernet link to control the amplifi er.
The following interface allows the full control of the amplifi er.
1040, avenue Belvédère, bureau 215, Québec (Québec) G1S 3G3 Canada | [email protected] | www.softdb.com