HP iPAQ Glisten-AT&T - Manual (Page 39)

To change ring tone and ring type:
1. Press Send , and then tap Menu > Options.
2. Select a ring type from the Ring type list.
3. Select a ring tone from the Ring tone list.
NOTE: To play a ring tone, tap play to the right of the Ring tone list.
4. Tap OK.
To change notification sounds:
1. Press Start , and then tap Settings > Sounds & Notifications.
2. On the Sounds tab, select the items that you would like to enable sound for.
3. On the Notifications tab, in the Event list, tap an event name, and then choose how you want
to be notified by selecting the appropriate check boxes. You can choose from several options,
such as a special sound, a message, flashing light, or vibrate.
Customize your screen
You can customize your iPAQ screen settings—correct screen alignment problems, smooth font edges,
and adjust the text size to suit your requirements.
To correct screen alignment:
1. Press Start , and then tap Settings > System > Screen.
2. On the Alignment tab, tap Align Screen.
3. Follow instructions on the screen using the stylus.
4. Tap OK.
To smooth font edges:
1. Press Start , and then tap Settings > System > Screen, and then tap the ClearType tab.
2. Select the Enable ClearType check box.
3. Tap OK.
To adjust text size:
1. Press Start , and then tap Settings > System > Screen > Text Size.
2. Move the slider on the screen to make the text size larger or smaller.
3. Tap OK.
Customize your screen 27