HP iPAQ Glisten-AT&T - Manual (Page 31)

Put a call on hold
During a call, you can put the call on hold and dial another number or answer an incoming call. If you
have more than one call on the line, you can switch between calls.
● To put a call on hold, tap Hold.
● To switch between calls, tap Swap.
NOTE: The Swap feature is available only if a call has already been placed on hold.
Hold and Swap are available only on the dialer screen.
Use Call Waiting
Use the Call Waiting feature to be notified of incoming calls when you are on another call. You can
view the phone number of the person calling you, put your current caller on hold, and answer the
incoming call.
To use Call Waiting:
1. Press Send to move the current phone call to Call Waiting.
2. Press Send to answer the incoming call or tap Ignore if you do not want to answer the call.
3. Tap Swap to switch between the calls.
Make emergency calls
You can make calls to emergency service numbers, even when you have locked your SIM card and/or
iPAQ, or when your iPAQ is turned off.
To dial an emergency number:
1. Press Send .
2. Use the keyboard to dial the local emergency number.
3. Press Send to place the call.
NOTE: Emergency numbers vary by country/region. Sometimes an emergency call cannot be placed
due to network, environmental, or interference issues.
Make calls using Speed Dial
You can dial phone numbers quickly by assigning speed dial numbers. You can choose speed dial
entries from 2–99. The speed dial entry 1 is by default set up to dial your voicemail.
NOTE: The Speed Dial feature is available only for phone numbers stored in the contact list.
Put a call on hold 19