HP iPAQ Glisten-AT&T - Manual (Page 32)

To add a Speed Dial number:
1. Press Send .
2. From your contacts list, tap a contact to open it.
3. Tap Menu, and then tap Add to Speed Dial.
4. On the Speed Dial screen, in the Location box, select a speed dial number, and then tap OK.
TIP: You can also assign speed dial numbers to web addresses and email addresses that are stored
in the Contacts on your iPAQ.
To make a speed dial call:
1. Press Send .
2. On the dialer screen, using the keyboard, hold the number you assigned as a speed dial entry.
For two-digit speed dial numbers, press the first digit, release it, and then press and hold the
second digit of the number.
Make a call from Contacts
To make calls from the contacts list:
1. Press Send .
2. Select or tap the contact name, and then press Send .
TIP: If you have a long list of contacts, enter the first few letters of a contact's name. Your iPAQ
searches the entire contact list to display the name.
Call voicemail
▲ On the Today screen or dialer screen, using the keyboard, press and hold 1 to automatically call
voicemail.
NOTE: To set up your voicemail, using the keyboard, press and hold 1. Follow the voice
prompts to complete setup.
Use the speakerphone
You can turn the speakerphone on during a call.
▲ On the dialer screen, tap Speaker On to turn the speaker on and the earpiece off.
Make a call from a hyperlink phone number
Use a hyperlinked phone number to quickly dial a phone number from an email or text message. A
hyperlinked phone number is underlined in the same manner as a website address.
20 Chapter 5 Make and receive phone calls