Ohaus AP250E ANALYTICAL Plus Electronic Balances - Manual (Page 55)

55
Date Date Date Date Date
Date is a feature which enables the balance to be set to a U.S.A. date standard or
European date standard. U.S. standard has the month, date followed by the year each
separated by (/) in the printout. The European date standard has the day first, followed
by the month and then the year each separated by a period. The default setting is US
Standard.
1. Access the submenu which is under Setup menu.
2. .
3. .
4. or .
5. .
6. .
7. flashes first two digits.
8. to change the first flashing digit to current month for US or day
for European standard.
9. .
10. to change flashing digit.
11. .
12. to change year.
13. .
14. .
15. .
NOTE NOTE NOTE NOTE NOTE: At power up, if Time in the GLP submenu is set to ON, the display flashes
for about 1.5 seconds to prompt setting of time and date .
MENUS