User menu, User menu protection, Reset – Ohaus AP250E ANALYTICAL Plus Electronic Balances User Manual
Page 38: User, Menus
38
USER MENU
USER MENU
USER MENU
USER MENU
USER MENU
The User menu is used to adapt the balance to environmental conditions. It contains
submenus which enable you to turn features on or off, and program balance param-
eters.
Reset
changes all submenus to original factory default settings.
Reset
does not
appear if menu has been locked out.
AL
specifies the averaging level.
STB
specifies
the desired stability range.
Auto Zero
sets the automatic zero threshold.
Dual,
when
set on, enables dual range function on model AP250D.
End User
is used to exit the
User menu and store the selections. The following figure illustrates the sequence in
which submenus appear on the User menu. Items shown in bold type are the default
settings.
USER MENU
USER MENU
USER MENU
USER MENU
USER MENU
RESET
YES/NO
AL
0, 1
1
1
1
1, 2
STABILITY
0, 1
1
1
1
1, 2, 3
AUTO ZERO
ON
ON
ON
ON
ON/OFF
-dUAL-
ON
ON
ON
ON
ON/OFF
END, User
User Menu Protection
User Menu Protection
User Menu Protection
User Menu Protection
User Menu Protection
The User menu may be locked out to prevent unauthorized personnel from changing
the settings. If -SAFE- is displayed, the User menu has been locked out. Settings
may be viewed but not changed. To lock out the User menu, refer to the section titled
Menu Lock-Out Protection.
Reset
Reset
Reset
Reset
Reset
This submenu enables you to reset all User menu selections to the
factory default
settings:
Averaging Level 1
1
1
1
1, Stability Range 1,
1,
1,
1,
1, Auto-Zero Tracking ON
ON
ON
ON
ON and Dual
Range ON.
ON.
ON.
ON.
ON. Reset does not appear if the menu has been locked out.
1.
.
2.
.
3.
.
4.
.
5.
to select
or
.
6.
. If
is selected, the
balance signals a
long beep
. Reset values are stored only if exited through
.
MENUS