M&C TechGroup MP12 Data sheet User Manual
Analytical diaphragm pump series mp, Version mp06, mp12, Special features
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
10.5
Embracing Challenge
Corrosion resistant
100% lubricant free
Gas tight
Maintenance free
Special Features
Analytical Diaphragm Pump
Series MP®
Version MP06, MP12
MP06
Application
The construction of the compact diaphragm
pumps type MP06 / MP12 and the pump
capacity are adapted to the requirements of
the gas analysis technique. Because of the
resistant material the pumps are suitable
especially for sampling corrosive gases.
Description
The diaphragm pumps type MP06 and MP12
are based on the same pump head. The differ-
ent pump capacities are realised by a robust
pump motor working on different rotary fre-
quencies, 1400 or 2800 rpm. The encapsu-
lated drive guarantees a vibration-free and
quiet operation. All parts in contact with the
sample are made of reinforced PTFE and FKM.
In order to garantee an operation without
interferences, it is important to pay atten-
tion to the permissible overpressure of 0,8
bar. Therefore you must decrease or regulate
the quantity of gas via a needle valve on the
sucking side or via a pressure control valve or
bypass on the pressure side.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/11.06