M&C TechGroup FPF-0,1GF Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
7.2
Embracing Challenge
ƒ ƒ
Flat design
ƒ ƒ
Low stagnant space
ƒ ƒ
Simple construction
ƒ ƒ
Simple assembly
ƒ ƒ
Easy change of filter element
ƒ ƒ
Universal usability
Special Features
Front panel mounting fine filter
series FP®
Version FPF-0,1GF
FPF-0,1GF
Application
The M&C front panel mounting extra-fine
filters reliably separate solids, in particular very
fine particles, occurring in analysis techniques
in gas filtration, using very fine, deep-acting
filter elements. The large filter surface of the
cylindrical filter element guarantees reliable
extra-fine filtration and a long service life with
low pressure drop.
The 19» front-plate mounting equipment
requires flat-design equipment for which the
FPF-0,1GF extra-fine filter has primarily been
developed.
Description
Special features of the M&C FPF-0,1GF front
panel mounting filter are flat design, low stag-
nant space, simple construction and assem-
bly as well as universal usability.
The condition of the filter can be seen imme-
diately from outside through the filter glass
without opening the filter fitting. No tools
are needed for changing the filter element;
here, the optimum positioning of the seal-
ing O-ring always guarantees reliable sealing
between filter glass and filter body.
The gas connections are located at the back
in the filter body. The inlet of the measuring
gas can be turned by 180° at the front ring
attachment so that a flexible adjustment to
local conditions is possible when assembling.
Corresponding tube connectors can be
optionally supplied.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/11.06