M&C TechGroup CLF-SS Operator's manual - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
7.8
Embracing Challenge
ƒ ƒ
High retention rate of 99,99% for parti-
cles > 0,1µm
ƒ ƒ
High chemical resistance of type CLF-T
ƒ ƒ
Type CLF-SS suitable for high pressure
applications
ƒ ƒ
Condition of filter element CLF-T visible
from outside
ƒ ƒ
Easy change of filter element
ƒ ƒ
Wall mounting
Special Features
Fluid Particle Filter Series CLF®
Version CLF-T, CLF-SS made out of special materials,
for removal of aerosols from gases
CLF-T
Application
The M&C fluid particle filter CLF-.. is suitable
for filtration of fluid particles of all types and
is recommended for sample gases with an
acid dew point above 100 °C. Examples are
measurements in flue gas of heavy oil and
black coal combustions.
The filter separates the aerosols (very fine fluid
particles) which still pass the gas cooler. The
most effective position of the CLF-.. filter is
downstream the sample conditioning close
to the flowmeter of the analyser.
Description
The filter element of the M&C fluid particle
filter is constructed in two sections with a
flow direction from the inside to the outside
of the filter element. The inner, very fine, fibre
layer binds the fluid particles suspended in
the gas and leads them together with the gas
flow to the outer, larger layer. On their way
through the filter element, the very fine fluid
particles accumulate with others and form
droplets. The vertical flow direction and the
force of gravity cause the droplets to drip into
the filter pot.
The filter element remains fully effective even
when completely saturated with fluid. If it is
not effected by solid particles, the lifetime
is nearly unlimited. The compressed micro-
fibres are made with binding of PVDF in order
to prevent influences on the sample gas.
The condition of the CLF-T filter is visible
through the glass body without opening the
filter.
The separated acid mist can continuously be
discharged with an external mounted peri-
staltic pump SR25.1 or a liquid drain AD-SS
(option) connected by a GL25 or a G3/8“
adapter.
No tools are required to change the filter ele-
ment. The optimised position of the O-ring
always guarantees a safe sealing of the filter
body to the filter head. The filter in- and out-
let can be turned by 180 ° on the mounting
bracket to achieve easy mounting and flexible
adaption to local circumstances.
The filter is made out of PTFE/glass or stainless
steel 316Ti.
Handle with care! Danger of acid burns!
Technical specifications and illustrations are without
obligation, subject to modifications. 06.99/06.06