M&C TechGroup ADS-SS Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
6.13
Embracing Challenge
ƒ ƒ
Save condensate removal and separa-
tion
ƒ ƒ
Completely made of stainless steel
ƒ ƒ
For high pressure and temperature
applications
ƒ ƒ
High drain capacity
Special Features
Automatic liquid drain
Version AD-SS
Separator and automatic liquid drain
Version ADS-SS
AD-SS
Application
The M&C liquid drain AD-SS is used in gas
conditioning systems where condensate
must be drained after cooling the gas.
For condensate pre-separation of saturat-
ed gas with simultaneous drainage, ADS-SS
separators and automatic liquid drains are
provided with a lateral gas connection for
additional separator functions. For function-
ing of the above mentioned drains overpres-
sure is required.
Description
The AD-SS and ADS-SS automatic liquid
drains function via gravity. The casing, float,
valve and valve seat are made of stainless
steel. The outlet valve is controlled by a lever
mechanism. The float closes the condensate
outlet via the lever mechanism with the valve
tip. Due to the rising condensate level the
outlet is released by the buoyancy of the float.
The ADS-SS separator with automatic con-
densate drain is a modification with an addi-
tional lateral gas connection.
Technical specifications and illustrations are without
obligation, subject to modifications. 04.95/06.06