M&C TechGroup ADS-So Operator's manual User Manual
Automatic liquid drainer, Separator including automatic liquid drainer, Version ad-p; ad-t; ad-so
M&C | TechGroup Germany GmbH
Rehhecke 79, D-40885 Ratingen
www.mc-techgroup.com
Fon +49 (0)2102 935-0
Fax +49 (0)2102 935-111
3-6.2.1M
04.95/06.06
Application
In gas sample conditioning systems and
especially in gas coolers, the M&C-automatic
liquid drainers AD-.. are used for continuous
draining of condensate.
The ADS-.. drainer has a modified upper part
with additional seperating function in order
to seperate and drain condensate from wet
gas sample flow.
The drainer only works in over-pressure
systems.
Description
The AD-.. and ADS-.. drainer work by the
buoyancy principal.
In the unscrewable lower part, a buoyant
float close with its needle the valve seat as
long as its weight will be neutralized from
the bouyancy of the condensate level. Then
the float lifts up, opens the valve seat, con-
densate drains off till the condensate level
will be so low, that buoyancy is lower than
float weight.
The 3 different drainer versions differ in
the material. Type AD-P, AD-T, ADS-P and
ADS-T have got a float housing made of
glass, type AD-So and ADS-So have got a
complete stainless-steel housing.
Cleaning is very simple and immediatly
done because all parts are remowable. With
type AD-P, AD-T, ADS-P and ADS-T, draining
function is visable from outside through the
glass housing.
Automatic liquid drainer
Version AD-P; AD-T; AD-So
Separator including automatic liquid drainer
Version ADS-P; ADS-T; ADS-So
Special Features
Save condensate removal and
seperation
Optical function control
Different materials possible
Simple and immediate cleaning
Note for operation !
The M&C automatic liquid drainers AD-.. and
the separators ADS-.. have to be filled with
water before operation, to guarantee a leak
tightness of the draining valve!
AD-T