M&C TechGroup FT-W Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
7.9
Embracing Challenge
ƒ ƒ
Chargeable with a variety of absorbents
ƒ ƒ
Easy change of absorbents
ƒ ƒ
Condition of liquid visible from outside
ƒ ƒ
Optimum outwashing effect
ƒ ƒ
Also for constant pressure upstream the
analyser
ƒ ƒ
Wall mounting
Special Features
Wash bottle series FP®
Version FP-W, FT-W
FP-W
Application
The F...-W wash bottle is used wherever indi-
vidual components are to be washed out of
a sample gas.
A further application is the maintenance of a
constant pressure upstream of an analyser by
establishing a constant differential pressure
with respect to the atmosphere by using the
second inlet. The admission pressure depends
on the liquid level in the wash bottle and is
maximum 10 mbar.
Description
The M&C F..-W wash bottle features compo-
nents from our universal filter range. The gas
passes a bubbler that intensifies the outwash-
ing effect. The glass filter body enables
the examination of the absorbent without
dismantling the wash bottle. No tools are
required changing the absorbent. The opti-
mal position of the O-ring guarantees the
tightness between body and head of the
wash bottle.
The wash bottle can be rotated about 180°
in the holder for wall mounting. This allows
a flexible adaptation of the in- and outlet to
local conditions.
The F..-W wash bottle is also available with an
optional GL18-6 connector at the bottom of
the glass body.
To avoid clogging of the bubbler, liquid and
particle separation should be arranged down-
stream of the wash bottle.
Overpressure at the outlet or underpressure
at the inlet of the wash bottle must be
avoided. Otherwise the liquid will be dis-
placed to the inlet of the wash bottle.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/11.06