M&C TechGroup SP10-H Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
2.2
Embracing Challenge
ƒ ƒ
Sampling of dusty process gases
ƒ ƒ
Fast response time
ƒ ƒ
Easy mounting and maintenance
ƒ ƒ
Electrically heated with integrated ther-
mostat unit
ƒ ƒ
Various materials and lengths for exten-
sion tubes and filters
ƒ ƒ
Many optional configurations are avail-
able
Special Features
Gas Sample Probe Series SP®
Version with internal process filter SP10, SP10-H
SP2600-H/C/I/BB/F/1K190
Application
The M&C gas sample probe, Version SP10,
are to be installed for continuous sampling of
high dust loaded gases, large flow sampling,
as well as for general gas sampling. Due to
its compact design, it requires only limited
space. It is to be mounted in a weather-proof
location.
Description
The M&C gas sample probe Version SP10
consists of a heat resistant tube adapter with
a 1» thread, on which is screwed the Stainless
Steel sintered filter element type V10. This
filter element type V10-/0.. has a large surface
area of 325 cm2 or on request the filter ele-
ment type V10-1/2.. with 960 cm2, on request
with internal volume displacer for fast res-
ponse time, which projects into the sampling
space, standard with 270 mm lengths. Longer
probe lengths of up to 2 metres are possible
by means of a threaded extension tube.
To protect the filter element against pos-
sible abrasion, a shape protection plate (V
- form) is available. For sample temperatures
up to 900 °C filters and extension tubes out of
Hastelloy-C are available.
In the heated model, SP10-H, an electrical
heating element is fitted in the area of the
probe flange, so no Dew point loss can occur.
The temperature is controlled by a capillary
sensor thermostat unit. When mounting in
the open, a weather protection shield type
130 should be fitted.will be done incl. the
filter area and the insitu probe tube or the
pre-filter.
Technical specifications and illustrations are without
obligation, subject to modifications. 03.97/06.06