M&C TechGroup FPF-0,1 Operator's manual - Manual (Page 2)

2
Subject for technical modifications Reproduction of this document or its content is not allowed without permission of M&C
M&C TechGroup Germany GmbH z Rehhecke 79 z 40885 Ratingen z Germany z Tel.: (0)2102/935-0 z Fax: (0)2102/935-111 z www.mc-techgroup.com
5 - 0.1 ME sampling and gas conditioning technology
© M&C 06.97/07.02
Instruction Manual
Ultra-fine filter series FP ® , v
ersion FPF-0,1 for panel-mounting
Application
The M&C front panel-mounting extra-fine filters reliably separate solids, in
particular very fine particles, occurring in analysis techniques in gas filtration,
using very fine, deep-acting filter elements. The large filter surface of the
cylindrical filter element guarantees reliable extra-fine filtration and a long
service life with low pressure drop.
The 19" front-plate mounting equipment requires flat-design equipment for
which the FPF-0,1 extra-fine filter has primarily been developed.
Description
Special features of the M&C FPF-0,1 front panel-mounting filter are flat design,
low dead volume, simple construction and assembly as well as universal
usability.
The condition of the filter can be seen immediately from outside through the
filter glass without opening the filter fitting. No tools are needed for changing the
filter element; here, the optimum positioning of the sealing O-ring always
guarantees reliable sealing of the filter glass in respect of the filter body. The
gas connections are located at the back in the filter body. The inlet of the
measuring gas can be turned by 180° at the front ring attachment so that a
flexible adjustment to local conditions is possible when assembling.
Corresponding tube connectors can be optionally supplied.
Technical Data
Front panel-mounting fine filter series FP
®
version FPF-0,1
Part N°. 04 F 1000
Filter element Glassfibre 0,1µm (others on
request)
Connections G1/8" i DIN ISO 228/1
Pressure max. 4 bar
Sample temperature max. 80°C
Ambient temperature max. 80°C
Filter surface 50 cm²
Dead volume 30 ml
Weight 280 g
Type of mounting Front panel mounting
Material of sample contacting parts PVDF, PTFE, glass, FPM
Air flow in Nl/hr and differential pressure in mbar with new filter element
0
10
20
30
40
50
60
70
0 100 200 300 400 500 600 700 800 900 1000 1100
Nl/hr
mbar
Panel-mounting filter FPF-0,1
30 36
ø65
A
B
Drilling in front panel ø50
1 2 3 4 5
7
Open
FPF-0,1
Auf
ш58
ш70
G 1/8"i
Ein In
Aus Out
FPF-0,1
B
A
M4
6
dimensions in mm.