EVS XTnano Version 10.03 - July 2010 Operation Manual - Manual (Page 78)

XTnano – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
71
For more information, refer to the section 9.15 ‘Replace Function’, on page 86.
U
NDO AND
R
EDO
The last modifications of a playlist can be undone/redone for as long as the
operator does not exit the playlist mode (for example by returning to live mode).
Pressing the Undo command (D key) will undo the last modification. Up to 9
modifications can be undone. Once a modification has been undone, it is possible
to redo it by pressing the Redo key (C key).
R
EPLACE
Please refer to the 9.15 Replace Function chapter for detailed information about
this function.
O
THER
A
NG
The OtherAng (Other Angle) function (SHIFT+C key) allows the operator to replace
the current playlist element by another playlist element showing a different angle
of the recorded material.
When the OtherAng option is selected, Multicam loads the local and network
trains that include the TC IN of the playlist element to replace. The trains are
loaded on the PRV channel, at the current TC of the loaded element. The jog is
used to shift from one record train to the other.
Once the requested record train is displayed on the PRV channel, pressing ENTER
replaces the current playlist element by the one created from the selected angle.
See also the section 9.10.7 ‘How to Change the Camera Angle of a Playlist
Element’, on page 74.