EVS XTnano Version 10.03 - July 2010 Operation Manual - Manual (Page 30)

XTnano – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
23
6. Pgm + Prv Mode
6.1 1PGM + PRV (PRESS A FROM MAIN
MENU)
At least 2 playback channels must be available to run this configuration.
This mode allows the operator to make replays with/or without transition effects
between all outputs. A string of replays can be put together and played back at the
operator’s discretion.
The LCD display is divided in two menus controlled by soft keys (A, B, C, and D).
To gain access to the upper menu, press MENU from the Remote Panel.
6.1.1 S
ECONDARY
M
ENU
Aud.Met. PgmSpd PostRoll
Mix. Sw To In Pref
M
IX
. / W
IPE
L>R / W
IPE
R>L / W
IPE
U>D / W
IPE
D>U / C
UT
.
Aud.Met. PgmSpd PostRoll
Mix. Sw To In Pref
These options determine the transition effect that will occur between the PGM and
PRV pictures. The mix, wipe and cut are on the same location. Pressing this
button will browse through these effects, showing the active one on the LCD menu.
Please refer to Setup menu to select the duration of the transition effect.
*PGM1*CAM A PRV CAM B
Aud.Met. PgmSpd PostRoll
Mix. Sw To In Pref
P.1 B.1
PL 11 <
Msg:
Rst Cam Sync Prv
Cam A Cam B