EVS XSnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 92)

Recorder Settings
Introduction
The Recorder settings allow specifying configuration settings associated to the record
channels.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦ on page 5, 6 or 7 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Technical menu of the Remote Control Panel (T2.X).
The following screenshot highlights the Recorder settings, defined on page 7 of the
Channels tab in the server-based application:
Loop Recording
Description Enables/disables the endless loop recording of all record
channels of the EVS server.
Values Yes (default) / No.
The value is forced to 'Yes' in XSense configurations.
XSnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 82