EVS XSnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 122)

3.6.2. OSD Settings
Introduction
The OSD settings allow specifying the settings related to the OSD and information to be
displayed on the monitoring screen.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Monitoring tab.
• in the Technical menu of the Remote Control Panel (T4.1).
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the OSD settings area:
Genlock Error
Description Enables or disables the Genlock information display on the
output monitor.
If the Genlock reference is not correct, the !GkV message
appears on the output monitor.
Values Yes (default) / No
XSnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 112