EVS XSnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 103)

Default Mapping for Audio Inputs and Outputs
Introduction
The tables below present the channel mapping for audio inputs and outputs in the
following configuration:
• XSnano chassis
• Maximum number of recorders or players (see section "General Information on
Supported Configurations" on page 53).
• Audio hardware configuration: 4 DB15 Analog + 16 BNC Digital
In configurations with less recorders or players, the irrelevant rows or columns should be
disregarded.
Audio (Embedded) Inputs
By default, the audio embedded mono channels from the source material are mapped as
shown in the table below onto the A/V material stored on the EVS server.
The table shows the maximum number of players, and an audio configuration with 16
tracks (mono channels):
OUT 1 OUT 2 OUT 3 OUT 4
Mono1 E1-01 E2-01 E3-01 E4-01
Mono2 E1-02 E2-02 E3-02 E4-02
Mono3 E1-03 E2-03 E3-03 E4-03
Mono4 E1-04 E2-04 E3-04 E4-04
Mono5 E1-05 E2-05 E3-05 E4-05
Mono6 E1-06 E2-06 E3-06 E4-06
Mono7 E1-07 E2-07 E3-07 E4-07
Mono8 E1-08 E2-08 E3-08 E4-08
Mono9 E1-09 E2-09 E3-09 E4-09
Mono10 E1-10 E2-10 E3-10 E4-10
Mono11 E1-11 E2-11 E3-11 E4-11
Mono12 E1-12 E2-12 E3-12 E4-12
Mono13 E1-13 E2-13 E3-13 E4-13
Mono14 E1-14 E2-14 E3-14 E4-14
Mono15 E1-15 E2-15 E3-15 E4-15
Mono16 E1-16 E2-16 E3-16 E4-16
93 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B