EVS IPDirector Version 5.9 - January 2011 Part 3 User’s Manual - Manual (Page 91)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – January 2011
78
8.8.2 H
OW TO
D
EFINE A
N
EW
B
IN
R
ULE
With a basic bin rule, you can select a target or a nearline destination to send new
clips or playlists to or you can request new clips to be automatically protected.
To define a new bin rule, proceed as follows:
1. Right-click the bin for which you want to define a bin rule.
The Bin contextual menu is displayed:
2. Select the Bin Rules > Create Bin Rules.
The Bin Rules window opens. See section ‘Bin Rules Window’ on page 81 for
a detailed description of the window.
3. Select the tab corresponding to the items you want the bin rule apply to (Clip
/ Playlist).
4. You can
• Define a post process by selecting the checkbox corresponding to the
target/nearline destination where you want to automatically send new items.
So, when creating a clip or playlist, if you request to send the new item to
the bin for which the post process has been defined, it will automatically be
sent to the target selected in the Bin Rules window.
• Select the Protect Clip when inserted in bin checkbox.
So, new clips sent to the corresponding bin will automatically be protected.
This option is not available for playlists.
5. Select the dates from which and until when you want the bin rule to apply in
the Validity from and Validity until fields.
The selected post-process will automatically be applied to clips or playlists that
will be copied to this bin.