AASTRA 4223 Professional for MD Evolution User Guide - Manual (Page 130)

Services Reserved for Attendants
MD Evolution – Dialog 4223 Professional
130
In comparison, the previously described night call forward, to which
your facility switches when it transitions to night mode, only routes
your facility’s general calls, but does not affect the internal users’
ability to be contacted through their DID numbers.
To program a general call forward for your facility, when your attendant
position is idle, and your general calls acceptance status is active:
Menu Press the Menu key.
You then are granted access to your position’s programming
mode.
CALL_FWD Press the dynamic function key shown on the left.
You may program your position’s call forwarding service, and as
the case may dictate, a system general call forward.
>> Press the Next key to display the following screen:
SYSTEM Press the dynamic function key shown on the left that corre-
sponds to your system general call forward service.
Your position displays the type of call forward requested, and prompts
you to enter the number for the external call forward recipient.
FWD NO
z
Dial the external number for the recipient of your system
general call forward.
This number may contain up to 18 digits. It should be dialled without
the “0” public network access prefix, since the system will automat-
ically take it into account.
CONFIRM Press the dynamic function key shown on the left to confirm
the external number you entered.
Your position then displays a message confirming the programming
of your system general call forward. í
Press the C key on your position to exit the programming mode.
The system general call forward that you have just defined is effective
immediately.
Programming
enabled disabled disabled disabled
GEN_CALL GROUP LOCK CALL_FWD >
Call fwd
NODISTURB NREP+BUSY REMOTE_FWD SYSTEM >
System call forward
Number : _
BLANK
CURSOR+ CONFIRM RETURN